

Search for USB Host Shield Library 2.0 and click ‘Install’.In Arduino IDE choose Sketch>Include Library>Manage Library.(For information on installing libraries, see: )

4.2 Downloading the USB Host Shield Library 2.0Įither download the Library from Here ( ) and place the folder into your libraries folder inside your Arduino folder.
#Sparkfun arduino usb host shield set ip how to
How to setup project 4.1 Downloading the project from GitHubĮither clone the project, or download it as a zip file and unzip it, into your Arduino folder. You must also apply a jumper from pin D7 to RESET.Ĥ.With the SparkFun board, it seems like you MUST supply external power on Vin or the barrel jack.A BleuIO dongle with firmware version 2.1.0 or later ( ).Using the example project 3.1 What you will need When found, we just print out “>” or “>” to the terminal. In this example, we are explicitly looking for BLE connection or disconnect events. We also store the latest data from the dongle into the dongle_input buffer and run it through a simple “parser” to showcase an easy way of how you can react to events and have the Arduino do something. If( rcvd ) //if( Usb.getUsbTaskState() = USB_STATE_RUNNING. Memset(dongle_input, 0, sizeof(dongle_input)) Rcode = Acm.SndData(strlen((char *)START_CMDS), (uint8_t *)START_CMDS)
#Sparkfun arduino usb host shield set ip serial
If the buffers have received any data, we print it out to the serial terminal connected to the Virtual COM Port. The largest possible max.packet size for the function Acm.RcvData() is 64 bytes, so to accommodate the amount of data we will receive, we are using three buffers to receive the data from the BleuIO Dongle. This project based on the ‘acm_terminal’ example in the Host USB Shield Library 2.0 3 with SparkFun’s USB Host Shield (DEV-09947) for this example. It will then act as a terminal, taking input and sending data to the Arduino Virtual Com Port. When a BleuIO Dongle is connected to the USB port, the BleuIO Dongle will start advertising. The project is a simple example showcasing a quick way to setup an Arduino with a USB Host Shield as a USB CDC Host capable of communicating with the BleuIO Dongle.
